NEC SL1100 - Appendix B Copy;Fill; Overview Copy (Advanced Tab; Figure B-1 System Data Copy

PC Programming Manual B - 1
___________________________________________________________________________________
Appendix B Copy/Fill
SECTION 1OVERVIEW COPY (ADVANCED TAB)
The system data copy function allows you to copy data from one item to another (e.g.,
one trunk to another). This copy only applies to a single program. Copy only appears
on screens where it is applicable.
Figure B-1 System Data Copy
2) Specify copy source.
3) Specify copy destination.
4) Specify data to be
copied.
5) Click OK to copy.
1) Select copy.