NEC SL1100 - Standard View Submenu; Accessing Standard View; Figure 4-2 Selecting a Standard View Screen

4 - 2 Standard View
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
SECTION 2STANDARD VIEW SUBMENU
2.1 Accessing Standard View
You can access Standard View submenu area using any of the following
methods:
 From the Standard View submenu, select the Ribbon Item
View> Standard.
or…
 Press F9.
or…
 If the submenu area is currently open, select the Standard tab depicting
the purple cog icon.
Once selected, the Standard View menu appears in the Programming
submenu area.
To view a particular Standard View screen, click on the screen name.
Figure 4-2 Selecting a Standard View Screen
Standard View selection