NEC SL1100 - Copying System Data (Advanced Tab; Copying System Data (Standard Tab

B - 2
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
SECTION 2COPYING SYSTEM DATA (ADVANCED TAB)
To copy a system data item:
1. Press the Copy button .
2. When the Copy dialog box is displayed, specify the source to copy from.
The source (From) shows the item being copied from. Only a single source item
can be selected.
3. Specify elements of the source that you want to copy.
These settings are specific to the system data being copied.
4. Specify the destination where you want to the elements copied.
The destination (To) details the item(s) where the selected source information is
copied to. Multiple destination items can be selected.
5. Press OK to copy the selected items.