NEC SL1100 Issue 3.01
PC Programming Manual 4 - 23
___________________________________________________________________________________
___________________________________________________________________________________
3.3 Blades/Ports
The screen represents a conceptual model of the chassis and the blade
packages within it. To obtain blade details download the configuration from the
chassis. The blade slots display the blade types (these are the blades that can
be inserted in the selected slot), the telephone/trunk port range (these are the
ports used by the blade) and firmware version (firmware being used by the
blade).
On this screen, you can right mouse click on the desired slot. A popup menu is
displayed indicating the configurable options for that slot. Once you have
selected the blade that is installed in that slot, the blade name is displayed on
the front of the slot location.
Figure 4-23 Blades/Ports
To Next Page
Loading...
