NEC SL1100 - Figure F-1 Pcpro Feature Activation Dialog

PC Programming Manual F - 1
___________________________________________________________________________________
Appendix F Feature Activation
SECTION 1INTRODUCTION
There are three methods for activation of features on the CPU-B1: automatic
activation via PCPro, manual activation via PCPro and manual activation via WebPro.
SECTION 2FEATURE ACTIVATION USING PCPRO
Some system features require registration before they can be used. Feature
Activation registers these features automatically via the Internet or manually through
input of Activation Codes. Feature Activation can only occur when PCPro is
connected to a system.
Figure F-1 PCPro Feature Activation Dialog
Hardware Key (number assigned
by NEC and printed on equipment).
Informational area that lists features available for activation. For each feature,
the quantity registered, the activation status (On = activated, Off = not activated) and
an expiration date for feature activation (if assigned) is displayed.
Registration
Request html report
for license.
Exit Feature
Activation.