NEC SL1100 - Page 242

F - 2
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
2.1 Accessing Feature Activation
When PCPro is connected to a chassis, access the Feature Activation dialog
by selecting the menu item Ribbon item Home > Feature Activation.
2.2 Activating a Feature
The license file contains the Software Code, which is required to activate the
feature.
To activate a feature manually:
1. Launch PCPro and access Feature Activation (refer to 2.1 Accessing
Feature Activation).
2. If connected to the SL1100 system, the Hardware Code is retrieved and
displayed.
3. Click Load File (refer to Figure F-2 Feature Activation Open File Dialog
on page F-3).

This file can reside on the PC or you can copy it to a flash drive to
reference if activating other locations.