PC Programming Manual 6 - 1
___________________________________________________________________________________
Chapter 6 Advanced View
SECTION 1OVERVIEW
The Advanced view can be used to program system data by PRG. System Data
represents system settings as per the categorization used by main software. This
categorization separates settings into System Data items called ‘PRGs’ (programs).
PRGs are identified by their ID and name. The ID and name indicate what settings the
System Data is related to. An example of a PRG identifier can be seen below, ‘10-02’
is the ID and ‘Location Setup’ is the name:
10-02: Location Setup
PRGs are grouped by their relationship into ‘PRG Groups’. PRG Groups are identified
by their ID and name. The ID and Name indicate what settings the System Data is
related to. An example of a PRG identifier can be seen below, ‘10-XX’ is the ID and
‘System Configuration’ is the name:
10-XX: System Configuration
Since Advanced View Programming does not group together the programs for a
function/feature as with Wizards and Standard screens, Advanced View Programming
is intended for advanced users of PCPro who are very familiar with programming a
system.
To Next Page
Loading...
