NEC SL1100 - Connecting Pcpro to the System; Figure A-2 Connect Dialog

A - 2
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
or…
 Select the icon depicting the disconnected black and yellow plugs .
or…
 Press F5.
2.2 Connecting PCPro to the System
Use the Connect dialog box to specify connection parameters to connect to
the system.
Figure A-2 Connect Dialog
(Optional) Load a
defined Connection
Account (can skip
steps 1~3 by using
this option.)
1) Select
Connection Type.
2) To login, specify
the User Name and
Password.
3) To make the
connection to the
system, click
Connect.