NEC SL1100 - Uploading Data from Pcpro to System Memory; Transfer Type; Figure A-11 Upload Dialog

NEC SL1100 Issue 3.01
PC Programming Manual A - 11
___________________________________________________________________________________
___________________________________________________________________________________
 Press F7.
4.2 Uploading Data from PCPro to System Memory
Use the Upload dialog to specify the parameters and perform an upload.
To upload data from PCPro to system memory:
1. Select a Transfer Type.
2. Select Transfer Type items.
3. If desired, select items via the Modify Filter.
4. Press the Start button.
5. After the upload is completed, press the Close button.
Figure A-11 Upload Dialog
3) Apply filter
to help find
items.
1) Select
Transfer Type.
2) Select
additional
item(s) to
upload.
4) Click Start to begin
download.
5) When completed, click
Close.