NEC SL2100 - Programmable Function Keys

Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Level:
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26
appended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program
Function Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number
Maximum eight digits
Key Number 1 ~ 32
Default Settings
Line Key Function Number Additional Data
LK01
*
01 (Trunk Line Key) 1
: : :
LK12
*
01 (Trunk Line Key) 12
LK13 0 (No Setting) 0 (No Setting)
: : :
LK32 0 (No Setting) 0 (No Setting)
Item No. Item Input Data Additional Data
01 Line Key Number 1 ~ 32 Refer to Table 4-4 Function Number
List on page 4-18.
Function Number 0 ~ 99, #0 ~ #99 Refer to Table 4-4 Function Number
List on page 4-18.
Default
Programmable keys 1 ~ 12 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2, etc.). All
other programmable keys are undefined.
Function Number List
ISSUE 1.0
SL2100
ACD Installation Manual 4-17
Program
15