GS108T and GS110TP Smart Switch Software Administration Manual
3-20 Configuring Switching Information
v1.0, April 2010
To configure OUI settings:
1. To add a new OUI prefix, type the VOIP OUI prefix in the Telephony OUI(s) field, provide a
description of the prefix, and click Add. The OUI prefix must be in the format AA:BB:CC.
2. To delete an OUI prefix from the list, select the check box next to the OUI prefix and click
Delete.
3. To modify information for an entry in the OUI list, select the check box next to the OUI prefix,
update the OUI prefix or description, and then click Apply.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. Click Restore Defaults to restore the list to the preconfigured OUIs.
Auto-VoIP
The Auto-VoIP automatically makes sure that time-sensitive voice traffic is given priority over
data traffic on ports that have this feature enabled. Auto-VoIP checks for packets carrying the
following VoIP protocols:
• Session Initiation Protocol (SIP)
• H.323
• Signalling Connection Control Part (SCCP)
• Media Gateway Control Protocol (MGCP)
VoIP frames that are received on ports that have the Auto-VoIP feature enabled are marked with
CoS traffic class 3.
To display the Auto-VoIP page, click Switching Auto-VoIP.
To Next Page
Loading...
