GS108T and GS110TP Smart Switch Software Administration Manual
Monitoring the System 6-21
v1.0, April 2010
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
The Status field in the Server Configuration table shows whether the remote logging host is
currently active.
Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
To access the Trap Logs page, click the Monitoring Logs tab, and then click the Trap Logs link.
The following table describes the Trap Log information displayed on the screen.
Figure 6-8
Table 6-6. Trap Log Statistics
Field Description
Number of Traps
Since Last Reset
The number of traps that have occurred since the switch last reboot.
To Next Page
Loading...
