NETGEAR GS108T-200NAS - Conventions, Formats and Scope

GS108T and GS110TP Smart Switch Software Administration Manual
xii
v1.0, April 2010
• Chapter 4, “Configuring Quality of Service” on page 4-1 describes how to manage the Access
Control Lists (ACLs), and how to configure the Differentiated Services and Class of Service
features.
• Chapter 5, “Managing Device Security” on page 5-1 contains information about configuring
switch security information such as port access control, TACACS+, and RADIUS server
settings.
• Chapter 6, “Monitoring the System” on page 6-1 describes how to view a variety of
information about the switch and its ports, and to configure how the switch monitors events.
• Chapter 7, “Maintenance” on page 7-1 describes features to help you manage the switch.
• Chapter 8, “Help”on page 8-1 describes how to access Online Help resources for the switch.
• Appendix A, “Hardware Specifications and Default Values” on page A-1 contains hardware
specifications and default values on the GS108T and GS110TP Smart Switches.
• Appendix B, “Configuration Examples” on page B-1 contains examples of how to configure
various features on the GS108T and GS110TP Smart Switches, such as VLANs and ACLs .
Note: Refer to the release notes for the GS108T Smart Switch and GS110TP Gigabit
Smart Switch for information about issues and workarounds.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links