GS108T and GS110TP Smart Switch Software Administration Manual
3-38 Configuring Switching Information
v1.0, April 2010
Multicast
Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D
IP addresses, which range from 224.0.0.0 to 239.255.255.255.
From the Multicast link, you can access the following pages:
• “Auto-Video Configuration” on page 3-38
• “IGMP Snooping” on page 3-39
• “IGMP Snooping Querier” on page 3-49
Auto-Video Configuration
The Auto-Video feature simplifies IGMP Snooping Querier configuration if the switch supports
devices or applications running multicast traffic, such as video surveillance cameras.
To access the Auto-Video Configuration page, click Switching Multicast Auto-Video.
To configure the Auto-Video feature:
1. Enable or disable the Auto-Video feature.
• Enable. The IGMP Snooping Querier is automatically configured with the default VLAN
ID for the Auto-Video VLAN
• Disable. IGMP Snooping settings must be manually configured.
Figure 3-26
To Next Page
Loading...
