3-1
v1.0, April 2010
Chapter 3
Configuring Switching Information
Use the features in the Switching tab to define Layer 2 features. The Switching tab contains links
to the following features:
• “Ports” on page 3-1
• “Link Aggregation Groups” on page 3-5
• “VLANs” on page 3-10
• “Voice VLAN” on page 3-16
• “Auto-VoIP” on page 3-20
• “Spanning Tree Protocol” on page 3-22
• “Multicast” on page 3-38
• “Forwarding Database” on page 3-53
Ports
The pages on the Ports tab allow you to view and monitor the physical port information for the
ports available on the switch. From the Ports link, you can access the following pages:
• “Port Configuration” on page 3-1
• “Flow Control” on page 3-4
Port Configuration
Use the Port Configuration page to configure the physical interfaces on the switch.
To access the Port Configuration page, click Switching Ports Port Configuration.
To Next Page
Loading...
