GS108T and GS110TP Smart Switch Software Administration Manual
5-24 Managing Device Security
v1.0, April 2010
From the Port Authentication link, you can access the following pages:
• Basic:
• “802.1X Configuration” on page 5-24
• Advanced:
• “Port Authentication” on page 5-25
• “Port Summary” on page 5-30
802.1X Configuration
Use the 802.1X Configuration page to enable or disable port access control on the system.
To display the 802.1X Configuration page, click Security Port Authentication Basic
802.1X Configuration.
To configure global 802.1X settings:
1. Select the appropriate radio button in the Port Based Authentication State field to enable or
disable 802.1X administrative mode on the switch.
• Enable. Port-based authentication is permitted on the switch.
Figure 5-14
To Next Page
Loading...
