GS108T and GS110TP Smart Switch Software Administration Manual
3-30 Configuring Switching Information
v1.0, April 2010
Click Refresh to update the information on the screen with the most current data.
Designated Bridge Bridge Identifier of the bridge with the Designated Port. It is made up using
the bridge priority and the base MAC address of the bridge.
Designated Port Port Identifier on the Designated Bridge that offers the lowest cost to the
LAN. It is made up from the port priority and the interface number of the port.
Topology Change
Acknowledge
Identifies whether the next BPDU to be transmitted for this port would have
the topology change acknowledgement flag set. It is either True or False.
Edge Port Indicates whether the port is enabled as an edge port. Possible values are
Enabled or Disabled.
Point-to-point MAC Derived value of the point-to-point status.
CST Regional Root Displays the bridge priority and base MAC address of the CST Regional
Root.
CST Path Cost Displays the path Cost to the CST tree Regional Root.
Port Forwarding State Displays the Forwarding State of this port.
Table 3-3. Spanning Tree CST Port Status Fields (continued)
Field Description
To Next Page
Loading...
