GS108T and GS110TP Smart Switch Software Administration Manual
Configuring Switching Information 3-51
v1.0, April 2010
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
7. Click Apply to apply the new settings to the switch. Configuration changes take effect
immediately
8. Click Refresh to update the page with the latest information from the switch.
IGMP Snooping Querier VLAN Configuration
Use this page to configure IGMP queriers for use with VLANs on the network.
To access this page, click Switching Multicast IGMP Snooping Querier Querier VLAN
Configuration.
To configure Querier VLAN settings:
1. To create a new VLAN ID for IGMP Snooping, select New Entry from the VLAN ID field and
complete the following fields:
• VLAN ID. Specifies the VLAN ID for which the IGMP Snooping Querier is to be
enabled.
• Querier Election Participate Mode. Enable or disable Querier Participate Mode.
Figure 3-34
To Next Page
Loading...
