GS108T and GS110TP Smart Switch Software Administration Manual
5-20 Managing Device Security
v1.0, April 2010
To configure an Access Profile:
1. In the Access Profile Name field, specify the name of the access profile to be added. The
maximum length is 32 characters.
2. To activate an access profile, select the Activate Profile check box. You cannot add rules to an
active profile.
3. To deactivate an access profile, select the Deactivate Profile check box.
4. To remove an access profile, select the Remove Profile check box. The access profile should
be deactivated before removing the access profile.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6. If you make changes to the page, click Apply to apply the changes to the system.
Figure 5-12
To Next Page
Loading...
