GS108T and GS110TP Smart Switch Software Administration Manual
Managing Device Security 5-55
v1.0, April 2010
2. Configure the new rule.
• Rule ID. Specify a number from 1–10 to identify the IP ACL rule. You can create up to 10
rules for each ACL.
• Action. Selects the ACL forwarding action, which is one of the following:
• Permit. Forwards packets which meet the ACL criteria.
• Deny. Drops packets which meet the ACL criteria.
• Egress Queue. Specifies the hardware egress queue identifier used to handle all packets
matching this ACL rule. Enter an identifying number from 0–3 in the appropriate field.
• Match Every. Requires a packet to match the criteria of this ACL. Select True or False
from the drop down menu. Match Every is exclusive to the other filtering rules, so if
Match Every is True, the other rules on the screen are not available.
Figure 5-32
To Next Page
Loading...
