EasyManuals Logo

NETGEAR GS908E User Manual

NETGEAR GS908E
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Access the Switch From a Mac Using Bonjour
If your Mac supports Bonjour, you can use the following procedure. If your Mac does not support Bonjour,
see Access the Switch From a Mac Using a Firefox Plug-In on page 15.
To access the switch from a Mac using Bonjour and discover the switch IP address:
1. Open the Safari browser.
2. Select Safari > Preferences.
The General page displays.
3. Click the Advanced tab.
The Advanced page displays.
4. Select the Include Bonjour in the Bookmarks Menu check box.
5. Close the Advanced page.
6. Depending on your Mac OS version, select one of the following, in which xx:xx:xx:xx:xx:xx is the MAC
address of the switch:
Bookmarks > Bonjour > GS908E (xx:xx:xx:xx:xx:xx)
Bookmarks > Bonjour > Webpages GS908E (xx:xx:xx:xx:xx:xx)
The login page of the local browser interface opens.
7. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
The right pane (or, depending on the size of your browser window, the middle pane) shows the IP
address that is assigned to the switch.
You can copy and paste the IP address into a new shortcut or bookmark it for quick access
on your computer or mobile device. However, if you reboot the switch, a dynamic IP
address (assigned by a DHCP server) might change and the bookmark might no longer
link to the login page for the switch. In this case, you must repea t Step 1 through Step 7
so that you can discover the new IP address of the switch in the network and update your
bookmark accordingly.You can also set up a fixed (static) IP address for the switch (see
Set Up a Fixed IP Address for the Switch on page 15) to make sure that the new bookmark
always links to the login page for the switch, even after you reboot the switch.
Tip
Install and Access the Switch in Your Network
14
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E

Table of Contents

Other manuals for NETGEAR GS908E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS908E and is the answer not in the manual?

NETGEAR GS908E Specifications

General IconGeneral
Switch typeManaged
Quality of Service (QoS) supportYes
SafetyIEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL 60950-1, CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable-
Certification47 CFR FCC Part 15, ICES-003:2016, ANSI C63.4:2014, EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2014, EN 6100-3-3:2013, AS/NZS CISPR 22:2009 + A1:2010, VCCI V-3/2015.04, V-4/2012.4
Product colorBlack, White
Rack mountingNo
Number of multicast groups filtered128
USB 2.0 ports quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)26.3 W
Power consumption (typical)3.3 W
Number of VLANs64
Networking standardsIEEE 802.1Q, IEEE 802.1p
Virtual LAN featuresPort-based VLAN
DHCP featuresDHCP client
Jumbo frames9000
Forwarding rate11.9 Mpps
Number of queues4
MAC address table4000 entries
Heat dissipation89.8 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth164 mm
Width234 mm
Height33 mm
Weight370 g

Related product manuals