Apply a Custom Preset Mode
If you previously saved QoS, port prioritization, multicast, flow control, IGMP snooping, and rate limiting
settings as a custom preset mode (see Save Your Quality of Service Settings as a Custom Preset Mode on
page 28), you can apply the preset mode.
To apply a previously saved custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select ADVANCED SETTINGS.
The PRESET MODES page displays.The LOAD tab is automatically selected.
5. Select a custom preset mode.
The PREVIEW section shows the settings for the custom preset mode.
6. Click the APPLY button.
Your settings are saved.
Apply the Standard Preset Mode
The Standard Preset mode, which is the default mode, gives all ports equal prioritization.
Applying the Standard Preset mode does the following:
• Sets the QoS port priority for all ports to High (for more information, see Set the Priority for a Port on
page 32).
• Enables IGMP snooping for the switch (for more information, see Manage IGMP Snooping on page 51).
• Disables flow control for all ports (for more information, Manage Flow Control for a Port on page 33).
• Disables power saving for the switch (for more information, see Manage the Power Saving Mode on
page 64).
• Sets the QoS mode to Port-based (for more information, see Use Port-Based Quality of Service and
Set Port Priorities on page 24).
• Disables rate limiting for all ports (for more information, see Set Rate Limits for a Port on page 31).
Before you apply the Standard Preset mode, you can save your current QoS, port prioritization, multicast,
flow control, and IGMP snooping settings and other settings as a custom preset mode (see Save Your
Quality of Service Settings as a Custom Preset Mode on page 28) so that you can easily revert to your
current QoS configuration.
Optimize the Switch Performance
29
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
To Next Page
Loading...
