EasyManuals Logo

NETGEAR GS908E User Manual

NETGEAR GS908E
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
The switch reboots.Your switch web session is disconnected and you must log back in to the local
browser interface.
Resolve a Subnet Conflict to Access the Switch
If you power on the switch before you connect it to a network that includes a DHCP server (or a router that
functions as a DHCP server), the switch uses its own default IP address of 192.168.0.239.This subnet might
be different from the subnet used in your network.
To resolve this subnet conflict:
1. Disconnect the Ethernet cable between the switch and your network.
2. Unplug the power adapter of the switch.
3. Reconnect the Ethernet cable between the switch and your network.
4. Plug the power adapter of the switch into an electrical outlet.
The switch powers on.The DHCP server in the network discovers the switch and assigns it an IP address
that is in the correct subnet for the network.
Diagnostics and Troubleshooting
73
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E

Table of Contents

Other manuals for NETGEAR GS908E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS908E and is the answer not in the manual?

NETGEAR GS908E Specifications

General IconGeneral
Switch typeManaged
Quality of Service (QoS) supportYes
SafetyIEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL 60950-1, CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable-
Certification47 CFR FCC Part 15, ICES-003:2016, ANSI C63.4:2014, EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2014, EN 6100-3-3:2013, AS/NZS CISPR 22:2009 + A1:2010, VCCI V-3/2015.04, V-4/2012.4
Product colorBlack, White
Rack mountingNo
Number of multicast groups filtered128
USB 2.0 ports quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)26.3 W
Power consumption (typical)3.3 W
Number of VLANs64
Networking standardsIEEE 802.1Q, IEEE 802.1p
Virtual LAN featuresPort-based VLAN
DHCP featuresDHCP client
Jumbo frames9000
Forwarding rate11.9 Mpps
Number of queues4
MAC address table4000 entries
Heat dissipation89.8 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth164 mm
Width234 mm
Height33 mm
Weight370 g

Related product manuals