EasyManuals Logo

NETGEAR GS908E User Manual

NETGEAR GS908E
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
9. To change an existing OUI, do the following:
a. Click the down arrow next to the OUI that you want to change.
b. Click the EDIT button.
c. Change the OUI, description, or both.
d. Click the SAVE button.
Your settings are saved.
10. To delete an OUI that you no longer need, do the following:
a. Click the down arrow next to the OUI that you want to delete.
b. Click the DELETE button.
Your settings are saved and the OUI is deleted.
11. Click the BACK button.
The VLAN page displays.
Deactivate the Port-Based or 802.1Q-Based VLAN Mode
and Delete All VLANs
If you activated the port-based VLAN mode or the 802.1Q-based VLAN mode, you can deactivate either
VLAN mode and delete all VLANs.
To deactivate the port-based VLAN mode or 802.1Q-based VLAN mode and delete all VLANs:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The Quality of Service (QoS) page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
6. In the No VLANs section, click the ACTIVATE button.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the CONTINUE button.
Your settings are saved and the pop-up window closes.
Use VLANS for Traffic Segmentation
47
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E

Table of Contents

Other manuals for NETGEAR GS908E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS908E and is the answer not in the manual?

NETGEAR GS908E Specifications

General IconGeneral
Switch typeManaged
Quality of Service (QoS) supportYes
SafetyIEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL 60950-1, CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable-
Certification47 CFR FCC Part 15, ICES-003:2016, ANSI C63.4:2014, EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2014, EN 6100-3-3:2013, AS/NZS CISPR 22:2009 + A1:2010, VCCI V-3/2015.04, V-4/2012.4
Product colorBlack, White
Rack mountingNo
Number of multicast groups filtered128
USB 2.0 ports quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)26.3 W
Power consumption (typical)3.3 W
Number of VLANs64
Networking standardsIEEE 802.1Q, IEEE 802.1p
Virtual LAN featuresPort-based VLAN
DHCP featuresDHCP client
Jumbo frames9000
Forwarding rate11.9 Mpps
Number of queues4
MAC address table4000 entries
Heat dissipation89.8 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth164 mm
Width234 mm
Height33 mm
Weight370 g

Related product manuals