Table 2. Factory default settings (Continued)
Default SettingFeature
Other features
No VLANs configuredVLANs
No LAGs configuredLink aggregation
DisabledPower saving mode
EnabledLoop prevention
DisabledPort mirroring
EnabledAuto-diagnostics
Enabled (nonconfigurable)Jumbo frames
Basic Technical Specifications
The following table shows the basic technical specifications of the switch.
For more specifications, see the data sheet that you can download by visiting downloadcenter.netgear.com.
Table 3. Basic technical specifications
DescriptionFeature
IEEE 802.3 Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3u 100BASE-TX
IEEE 802.1p Class of Service
IEEE 802.3ab 1000BASE-T
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE standards
Eight RJ-45 ports, supporting 10BASE-T, 100BASE-TX, or 1000BASE-TNetwork interfaces
Use a Category 5 (Cat 5) or higher rated Ethernet cable.Network cable
Input: 100–240 VAC, 50–60 Hz (The plug is localized to the country of sale.)
Output: 12V, 2.5A
Power adapter
From 3.3W (no USB charging) to 26.3W (USB charging)Power consumption
9.22 x 6.46 x 1.29 in. (234 x 164 x 33 mm)Dimensions (W x D x H)
0.81 lb (0.37 kg)Weight
Factory Default Settings and Technical Specifications
76
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
To Next Page
Loading...
