NETGEAR Nighthawk AC1900 D7000v2 User Manual

To remove a USB device safely:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > ReadySHARE Storage.
The USB Storage (Advanced Settings) page displays.
5. In the Available Network Folders table, select the device.
6. Click the Safely Remove USB Device button.
The device goes offline and a pop-up window opens.
7. Click the OK button.
8. Physically disconnect the USB device.
Share a Storage Device
126
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Large homes
Memory	128 MB Flash and 256 MB RAM
Frequency Band	2.4GHz and 5GHz
Beamforming+	Yes
Smart Connect	Yes
Guest Network	Yes
VPN Support	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Number of Ethernet Ports	4 x Gigabit Ethernet
Number of USB Ports	2 (USB 2.0 and USB 3.0)
Processor	Dual-core 1GHz
Security Features	WPA/WPA2
Wireless Standard	802.11 a/b/g/n/ac
Ports	4 Gigabit Ethernet, 2 USB
Modem Type	VDSL/ADSL