Name: NETGEAR Nighthawk AC1900 D7000v2
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Figure 3. Modem router back panel

In addition to the three antennas, viewed from left to right, the back panel contains the following components:

• DSL port. One RJ-11 DSL port for connecting the modem router to an ADSL or VDSL line.This port is

colored gray.

You can use either the DSL port or the Internet port for WAN connectivity.Note

• Ethernet LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem router to LAN

devices.These ports are colored yellow. Ethernet port 4 can be used for a WAN connection.

• Internet WAN port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a fiber or

cable modem.This port can also be used as an Ethernet port if you set up a DSL Internet connection.

You can use either the Internet port or the DSL port for WAN connectivity.Note

• Reset button. For information about using the Reset button, see Return the Modem Router to Its Factory

Default Settings on page 159.

• Power On/Off button. Press the Power On/Off button to provide power to the modem router.

• DC power connector. Connect the power adapter that came in the product package to the DC power

connector.

Hardware Overview of the Modem Router

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Questions and Answers:

Need help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General