EasyManuals Logo

NETGEAR Nighthawk AC1900 D7000v2 User Manual

NETGEAR Nighthawk AC1900 D7000v2
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
(Continued)
DescriptionField
If your ISP provided you with a VLAN ID and a priority value, enter the priority
value, which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Priority (0 ~ 7)
By default, the menu selection is PPPoE for a PPP over Ethernet VDSL
connection.
The VDSL connection does not support PPP over ATM (PPPoA).
Internet Service Provider
Enter the login name that you use to log in to your Internet service, as
indicated by your ISP.
This login name is often an email address.
Login
Enter the password that you use to log in to your Internet service, as indicated
by your ISP.
Password
Enter the service name that you use to log in to your Internet service, as
indicated by your ISP.
Often, a service name is not required.
Service Name (If Required)
Select how the Internet connection functions:
• Always On. Once the Internet connection is established, it remains
active. This is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet,
the Internet connection is established. When the idle time-out period
expires, the Internet connection is terminated.
• Manually Connect.You must connect to the Internet manually (see
View, Establish, or Terminate the PPPoE or PPPoA Internet Connection
on page 169).
Connection Mode
If you select Dial on Demand from the Connection Mode menu, enter the
idle time-out period in minutes.
The idle time-out specifies how long the modem router keeps the Internet
connection active when no one on the network is using the Internet
connection.The default is 5 minutes. To disable the idle time-out, enter 0.
(When you disable the idle time-out, the connection is not terminated
automatically).
Idle Timeout (In Minutes)
Internet IP Address
Your ISP uses DHCP to assign your IP address.Your ISP automatically
assigns these addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service.The gateway is the ISP router to
which your modem router connects.
Use Static IP Address
Manage the Internet Settings Manually
47
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General IconGeneral
WiFi PerformanceAC1900 (600 + 1300 Mbps)
WiFi RangeLarge homes
Memory128 MB Flash and 256 MB RAM
Frequency Band2.4GHz and 5GHz
Beamforming+Yes
Smart ConnectYes
Guest NetworkYes
VPN SupportYes
Parental ControlsYes
Quality of Service (QoS)Yes
WiFi Technology802.11ac
Number of Ethernet Ports4 x Gigabit Ethernet
Number of USB Ports2 (USB 2.0 and USB 3.0)
ProcessorDual-core 1GHz
Security FeaturesWPA/WPA2
Wireless Standard802.11 a/b/g/n/ac
Ports4 Gigabit Ethernet, 2 USB
Modem TypeVDSL/ADSL

Related product manuals