NETGEAR Nighthawk AC1900 D7000v2 User Manual

(Continued)
DescriptionField
From the Channel menu, select an individual channel. The default channel depends on
your selection from the Region menu.
In some regions, not all channels are available. Do not change the channel
unless you experience interference (shown by lost connections or slow
data transfers). If this situation occurs, experiment with different channels
to see which is the best.
Note
If you use multiple WiFi access points (APs), reduce interference by
selecting different channels for adjacent APs.We recommend a channel
spacing of four channels between adjacent APs.
Note
Channel
From the Mode menu, select one of the following modes:
• Up to 289 Mbps. Legacy mode.This mode allows 802.11ac, 802.11n, and 802.11a
devices to join the network but limits 802.11ac and 802.11n devices to functioning at
up to 289 Mbps.
• Up to 600 Mbps. Neighbor-friendly mode for reduced interference with neighboring
WiFi networks.This mode allows 802.11ac, 802.11n, and 802.11a devices to join the
network but limits 802.11ac devices to functioning at up to 600 Mbps.
• Up to 1300 Mbps. Performance mode.This mode allows 802.11ac, 802.11n, and
802.11a devices to join the network and allows 802.11ac devices to function at up to
1300 Mbps.This mode is the default mode.
Mode
Manage the WiFi Network Settings
77
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Large homes
Memory	128 MB Flash and 256 MB RAM
Frequency Band	2.4GHz and 5GHz
Beamforming+	Yes
Smart Connect	Yes
Guest Network	Yes
VPN Support	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Number of Ethernet Ports	4 x Gigabit Ethernet
Number of USB Ports	2 (USB 2.0 and USB 3.0)
Processor	Dual-core 1GHz
Security Features	WPA/WPA2
Wireless Standard	802.11 a/b/g/n/ac
Ports	4 Gigabit Ethernet, 2 USB
Modem Type	VDSL/ADSL