108 | Appendix A. Supplemental Information
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Local Network (LAN)
LAN IP address 192.168.0.100
Subnet mask 255.255.255.0
Gateway address 0.0.0.0
DHCP server Disabled
DHCP client Disabled
Time zone USA-Pacific
SNMP Disabled
Spanning Tree Protocol Disabled
Secure Shell (SSH) Enabled
Secure Telnet Disabled
Wireless Local Network (WLAN)
Operating mode Access point, infrastructure mode
Wireless access point name netgearxxxxxx where xxxxxx is the last 6 digits of the
wirel
ess access point MAC address.
Wireless communication Enabled
11 b/g/n wireless network name (SSID) NETGEAR_11ng
Broadcast network name SSID Enabled
Security Disabled (open system)
Transmission speed Best
a
Country and region Varies by region
802.11ng radio frequency channel Auto
Output power Full
Wireless card access list All wireless stations allowed
WMM support Enabled
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Table 30. ProSafe Wireless-N Access Point WNAP320 Default Configuration Settings
Feature Description
To Next Page
Loading...
Need help?
General
