18 | Chapter 2. Installation and Basic Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Log In to the Wireless Access Point
The default IP address of your wireless access point is http://192.168.0.100. The wireless
access point is set, by default, for the DHCP client to be disabled.
To log in to the wireless access point:
1. Op
en a Web browser such as Microsoft Internet Explorer 6.0 or later, or Mozilla Firefox
1.5 or later.
2. Connect to the wire
less access point by entering its default address of http://192.168.0.100
into your browser.
The Login screen opens:
Figure 5.
3. Enter the default user name of admin and the default password of password.
4. Click Lo
gin. The Web browser displays the basic General system settings screen under the
Configuration tab of the main menu as shown in Figure 8 on p
age 19.
Web Management Interface
The navigation tabs across the top of the Web Management Interface provide access to all
the configuration functions of the wireless access point, and remain constant. The menu
items in the blue bar change according to the navigation tab that is selected.
Figure 6.
To Next Page
Loading...
Need help?
General
