NETGEAR ProSafe WNAP320 User Manual

Chapter 1. Introduction | 7
ProSafe Wireless-N Access Point WNAP320 Reference Manual
What Is In the Box?
The product package should contain the following items:
• ProSafe Wirele
ss-N Access Point WNAP320
• Power ada
pter and cord (12 VCD, 1.0A)
• S
traight-through Category 5 Ethernet cable
• NE
TGEAR WNAP320 Wireless-N Access Point Installation Guide
• Resou
rce CD, which includes this manual
• W
all-mount kit made up of brackets and hardware
Contact your reseller or customer support in your a
rea if there are any missing or damaged
parts.
Refer to the NETGEAR website at http://kbserver.netgear
.com/main.asp for the telephone
number of customer support in your area. You should keep the Inst
allation Guide, along with
the original packing materials, and use the packing materials to repack the wireless access
point if you need to return it for repair.
To qualify for product updates and product warranty
, NETGEAR encourages you to register
on the NETGEAR website at http://my.netgear.com/r
egistration/login.aspx.
System Requirements
Before installing the wireless access point, make sure that your system meets these
requirements:
• A 10/10
0/1000 Mbps local area network device such as a hub or switch
• The Cate
gory 5 UTP straight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100–
120V, 50–60 Hz AC power source
• A W
eb browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or
Mozilla 1.5 or later
• At lea
st one computer with the TCP/IP protocol installed
• An 802
.11b/g- or 802.11n/g-compliant device, such as the NETGEAR WNDA3100
wireless adapter
Key Features and Standards
The ProSafe Wireless-N Access Point WNAP320 is easy to use and provides solid wireless
and networking support. It also offers a wide range of security options.

NETGEAR ProSafe WNAP320 Specifications

General

Brand	NETGEAR
Model	ProSafe WNAP320
Category	Wireless Access Point
Language	English