74 | Chapter 4. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
3. Select the file, and click Open.
4. Click Apply
to upload the list with access points to the Known AP List.
View and Save Access Point Lists
The wireless access point detects nearby APs and wireless stations and maintains them in a
list. You can use this list to prevent them from connecting to the wireless access point.
To view the Unknown AP List and save it to a file:
1. Select Mon
itoring > Rogue AP > Unknown AP List. The Unknown AP List screen
displays:
Figure 46.
2. Click Refresh to let the wireless access point discover the access points and populate the
Unknown AP List.
The following table explains the fields
of the Unknown AP List screen:
Table 20. Unknown AP List Fields
Field Description
MAC Address The MAC address of the unknown AP.
SSID The SSID that the unknown AP is using.
Privacy Indicates whether or not security is en
abled (1 means enabled; 0 means
disabled).
Channel The channel that the unknown AP is using.
Rate The transmit data rate in Mbps of the unknown the AP.
Beacon Int. The interval for each beacon transmission in ms.
# of Beacons The number of beacons transmitted b
y the unknown AP that the wireless
access point has detected.
Last Beacon The timestamp that indicates the time when the most recent beacon was
de
tected.
To Next Page
Loading...
Need help?
General
