EasyManuals Logo

NETGEAR ProSafe WNAP320 User Manual

NETGEAR ProSafe WNAP320
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38 | Chapter 3. Wireless Configuration and Security
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Before You Change the SSID, WEP, and WPA Settings
For a new wireless network, print or copy this form and fill in the settings. For an existing
wireless network, the network administrator can provide this information. Be sure to set the
Country/Region correctly as the first step. Store this information in a safe place.
SS
ID: The service set identification (SSID) identifies the wireless local area network. You
can customize it by using up to 32 alphanumeric characters. Write your SSID on the line.
SSID:
___________________________________
Note: The SSID in the wireless access point is the SSID you configure in
the wireless adapter card. All wireless nodes in the same network
must be configured with the same SSID.
WEP Key Size, Key Format Passphrase, and Authentication
Choose the key size by circling one: 64, 128, or 152 bits.
Choose the key format by circling one: ASCII or HEX.
Choose the authentication type by circling one: Open or Shared.
Passphrase:
___________________________________
Note: If you sele
ct shared key, the other devices in the network will not connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless access point.
WP
A-PSK (Pre-Shared Key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK Passphrase:
________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK Passphrase:
________________________________
WPA RADIUS Settings
For WPA, record the following settings for the p
rimary and secondary RADIUS servers:
Server Name/IP Address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared Secret:
___________________________________
WP
A2 RADIUS Settings
For WPA2, record the following settings for the
primary and secondary RADIUS servers:
Server Name/IP Address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared Secret:
___________________________________

Table of Contents

Other manuals for NETGEAR ProSafe WNAP320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSafe WNAP320 and is the answer not in the manual?

NETGEAR ProSafe WNAP320 Specifications

General IconGeneral
BrandNETGEAR
ModelProSafe WNAP320
CategoryWireless Access Point
LanguageEnglish

Related product manuals