Appendix A. Supplemental Information | 107
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Factory Default Settings
You can use the Reset button located on the rear of the wireless access point to reset all
settings to their factory defaults. This is called a hard reset.
• T
o perform a hard reset, use a sharp object to push and hold the Reset button for
approximately 5 seconds (until the Test LED blinks rapidly). This returns the wireless
a
ccess point to the factory configuration settings that are shown in the following table.
Note: Pressing the Reset button for a shorter period of time simply causes
the wireless access point to reboot.
Environmental
specifications
Operating temperature: 0 to 55° C (32 to 131° F)
Operating humidity: 10–9%, noncondensing
Electromagnetic
co
mpliance
FCC Part 15 Class B and Class E, CE, and C-TICK
Table 30. ProSafe Wireless-N Access Point WNAP320 Default Configuration Settings
Feature Description
Login
User login URL 192.168.0.100
User name (case-sensitive) admin
Login password (case-sensitive) password
Ethernet Connection
Static IP address 192.168.0.210
Ethernet MAC address See bottom label.
Port speed 10/100/1000
Table 29. ProSafe Wireless-N Access Point WNAP320 Technical Specifications
Feature Description
To Next Page
Loading...
Need help?
General
