Chapter 2. Installation and Basic Configuration | 19
ProSafe Wireless-N Access Point WNAP320 Reference Manual
The bottom right corner of all screens that allow you to make configuration changes show the
Apply and Cancel buttons, and on several screens the Edit button.
Figure 7.
These buttons have the following functions:
• Edit. Allows you to
edit the existing configuration.
• Cancel.
Cancels all configuration changes that you made on the screen.
• Apply. Saves a
nd applies all configuration changes that you made on the screen.
Configure Basic General System Settings and Time Settings
Note: After you have successfully logged in to the wireless access point,
the basic General system settings screen displays.
To configure basic system settings:
1. Select Configurati
on > System > Basic > General. The basic General system settings
screen displays:
Figure 8.
To Next Page
Loading...
Need help?
General
