NETGEAR ProSafe WNAP320 User Manual

Chapter 2. Installation and Basic Configuration | 23
ProSafe Wireless-N Access Point WNAP320 Reference Manual
2. Specify the fields as explained in the following table:
3. Click App
ly to save your settings.
Configure Basic Wireless Settings
For proper compliance and compatibility between similar products in your coverage area, you
must correctly configure 802.11b/g/n wireless adapter settings, including the operating
channel and country. The basic wireless network settings must be set correctly for wireless
devices to connect to your network. For other wireless features, including wireless security,
see Chapter 3, Wireless Configuration and Security.
Table 5. LAN Settings
Field Description
DHCP Server Select the DHCP Server check box to enable the DHCP server. Use the default settings or
specify the pool of IP addresses to be assigned by setting the starting IP address and
ending IP address. These addresses should be part of the same IP address subnet as the
wireless access point’s LAN IP address.
DHCP Server VLAN ID Enter the DHCP server VLAN ID. The VLAN ID range is between
1 a
nd 4094.
Starting IP Address Enter the first address in the range of IP addresses to be
assigne
d to DHCP clients. The default address is 192.168.1.02.
Ending IP Address Enter the last address in the range of IP addresses to be
assigne
d to DHCP clients. The default address is 192.168.1.50.
Subnet Mask Enter the subnet mask to be used by DHCP clients. The default
ma
sk is 255.255.255.0.
Gateway IP Address Enter the IP address of the default routing gateway to be used by
DHCP clients. The default address is 192.168.0.1.
Primary DNS Address Enter the IP address of the
primary Domain Name Server (DNS)
server available to DHCP clients.
Secondary DNS Address Enter the IP address of the secondary DNS server available to
DHCP cl
ients.
Primary WINS Server Enter the IP address of the primary WINS server for the network.
Secondary WINS Server Enter the IP address of the seco
ndary WINS server for the
network.
Lease Enter the period that the DHCP server grants to DHCP clients to
use the assigned IP addresses. The default time is 1 day.

NETGEAR ProSafe WNAP320 Specifications

General

Brand	NETGEAR
Model	ProSafe WNAP320
Category	Wireless Access Point
Language	English