NETGEAR ProSafe WNAP320 User Manual

24 | Chapter 2. Installation and Basic Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
WARNING!
If you configure the wireless access point from a wireless
computer and you change the wireless access point’s SSID,
channel, or wireless security settings, you will lose your wireless
connection when you click Apply. You must then change the
wireless settings of your computer to match the wireless access
point’s new settings.
To configure the 802.11b/g/n wireless settings:
1. Select Configuration
> Wireless > Basic > Wireless Settings. The basic Wireless
Settings screen displays. (The following figure shows the 11ng setting.)
Figure 12.

NETGEAR ProSafe WNAP320 Specifications

General

Brand	NETGEAR
Model	ProSafe WNAP320
Category	Wireless Access Point
Language	English