40 | Chapter 3. Wireless Configuration and Security
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Figure 15.
3. Specify the settings of the Profile Definition section of the Edit Security Profile screen as
explained in the following table:
4. S
pecify the settings of the Authentication Settings section of the Edit Security Profile screen
as explained in the following table.
Table 8. Profile Definition Settings of the Edit Security Profile Screen
Field Description
Profile Name Enter a unique name of the wireless security profile
that makes it easy to
recognize the profile. The default names are NETGEAR, NETGEAR-1,
NETGEAR-2, and so on through NETGEAR-7. You can enter a value of up
to 32 alphanumeric characters.
Wireless Network Name
(SSID)
The wireless network name (SSID) for the wirel
ess security profile. The
default names are NETGEAR_11ng, NETGEAR_11ng-1,
NETGEAR_11ng-2, and so on through NETGEAR_11ng-7.
Broadcast Wireless
Ne
twork Name (SSID)
Select the Yes radio button to enable the wireless access point to
broadcasts its SSID, allowing wireless stations that have a null (blank)
SSID to adopt the wireless access point’s SSID. Yes is the default setting.
To prevent the SSID from being broadcast, select the No radio button.
To Next Page
Loading...
Need help?
General
