NETGEAR ProSafe WNAP320 User Manual

Chapter 3. Wireless Configuration and Security | 49
ProSafe Wireless-N Access Point WNAP320 Reference Manual
2. Specify the settings as explained in the following table:
3. Click App
ly to save your settings.
Table 13. RADIUS Server Settings
Field Descriptions
RADIUS Server Settings
Primary
Authentication Server
IP Address Enter the IP address of the primary RADIUS server for
authentication.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to access the
primary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
an
d the primary RADIUS server during authentication.
Secondary
Authentication Server
IP Address Enter the IP address of the secondary RADIUS server for
au
thentication. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to access the
secondary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
an
d the secondary RADIUS server during authentication.
Primary
Accounting Server
IP Address Enter the IP address of the primary RADIUS server for accounting.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to access the
primary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
an
d the primary RADIUS server during the accounting process.
Secondary
Accounting Server
IP Address Enter the IP address of the secondary RADIUS server for
acco
unting. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to access
the secondary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
an
d the secondary RADIUS server during the accounting process.
Authentication Settings
Reauthentication
T
ime (Seconds)
The interval in seconds after which the supplicant is reauthenticated with the
RADIUS server. The default interval is 3600 seconds (1 hour). Enter 0 to disable
reauthentication.
Update Global Key
Eve
ry (Seconds)
Select the check box to allow the global key update, and enter the interval in
seconds. The check box is selected by default, and the default interval is
1800 seconds (30 minutes). Clear the check box to prevent the global key update.

NETGEAR ProSafe WNAP320 Specifications

General

Brand	NETGEAR
Model	ProSafe WNAP320
Category	Wireless Access Point
Language	English