NETGEAR ProSafe WNAP320

82 | Chapter 5. Advanced Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
The queues defined for different types of data transmitted from AP-to-station and
station-to-AP are:
• Dat
a 0 (Best Effort). Medium priority queue, medium throughput and delay. Most
traditional IP data is sent to this queue.
• Dat
a 1 (Background). Lowest priority queue, high throughput. Bulk data that requires
maximum throughput and is not time-sensitive is sent to this queue (FTP data, for
example).
• Dat
a 2 (Video). Highest priority queue, minimum delay. Time-sensitive video data is
automatically sent to this queue.
• Dat
a 3 (Voice). Highest priority queue, minimum delay. Time-sensitive data such as VoIP
and streaming media are automatically sent to this queue.
To configure advanced QoS:
1. Select Configuration
> Wireless > Advanced > QoS Settings. The advanced QoS
Settings screen displays:
Figure 50.