Configure System Information
44
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Note: When you use SNTP/NTP time servers to update the switch’s clock,
the time data received from the server is based on the UTC 0:00, which
is the same as Greenwich Mean Time (GMT). This might not be the
time zone in which the switch is located.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
9. To refresh the page, click the Update button.
View SNTP Global Status
You can view global SNTP status information.
To view SNTP global status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > SNTP Global Status.
6. Click the Update button to update the page with the latest information about the switch.
To Next Page
Loading...
Need help?
General
