Configure System Information
45
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The following table displays the nonconfigurable SNTP Global Status information.
Configure Daylight Saving Time Settings
Use the Daylight Saving Time Configuration page to configure settings for daylight saving
time, which is also known as summer time. Used in some countries around the world,
daylight saving time is the practice of temporarily advancing clocks during the summer
months. Typically clocks are adjusted forward one or more hours near the start of spring and
are adjusted backward in autumn.
To configure the daylight saving time settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
Table 8. SNTP Global Status information
Field Description
Version The SNTP version that the client supports.
Supported mode The SNTP modes that the client supports. Multiple modes can be supported by
a client.
Last Update Time The local date and time (UTC) that the SNTP client last updated the system
clock.
Server IP Address The IP address of the server for the last received valid packet. If no message
was received from any server, an empty string is shown.
Address Type The address type of the SNTP server address for the last received valid
packet.
Server Stratum The claimed stratum of the server for the last received valid packet.
Server mode The mode of the server for the last received valid packet.
Unicast Server Max Entries The maximum number of unicast server entries that can be configured on this
client.
Unicast Server Current Entries The number of current valid unicast server entries configured for this client.
To Next Page
Loading...
Need help?
General
