NETGEAR RAX5 User Manual

Note: To avoid interference with other routers or gateways in your network, we
recommend that you use different WiFi settings on each router. You can also turn
off the WiFi radio on the other router or gateway and use only this router for WiFi
client access.
7. Click the Apply button.
The IP address of the router changes, and you are disconnected.
8.
To reconnect, close and restart your browser and type http://www.routerlogin.net.
Set up router mode
If you set up your router as an access point (AP mode), you can change it back to a
router (Router mode).
To change the router back to router mode.
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Router / AP Mode.
The Router / AP Mode page displays.
5. Select the Router Mode radio button.
The page adjusts.
6. Click the Apply button.
Your settings are saved.
Manage LED blinking or turn off LEDs
You can disable or enable LED blinking. You can also turn off the LEDs.
User Manual128Manage and Monitor Your
Router
4-Stream AX1600 WiFi 6 Router Model RAX5

NETGEAR RAX5 Specifications

General

Brand	NETGEAR
Model	RAX5
Category	Network Router
Language	English