You can also keep port triggering enabled and disable an individual port triggering
rule.
To disable an individual port triggering rule:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6.
In the Port Triggering Portmap Table, clear the check box for the rule that you want
to disable.
7. Click the Apply button.
Your settings are saved. The router does not apply the rule that you disabled.
Disable port triggering
By default, port triggering is enabled. You can disable port triggering temporarily
without removing any port triggering rules. For information about disabling an individual
port triggering rule, see Disable an individual port triggering rule on page 151.
To disable port triggering:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
User Manual152Manage Port Forwarding and
Port Triggering
4-Stream AX1600 WiFi 6 Router Model RAX5
To Next Page
Loading...
Need help?
General
