Note: If the smart connect feature is enabled, the CTS/RTS threshold and preamble
mode apply to all radios. That means that you cannot change the CTS/RTS threshold
and preamble mode for each radio individually.
To change the CTS/RTS threshold or preamble mode for a radio:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5.
In the CTS/RTS threshold (1-2347) field for a radio, enter a value from 1 to 2437.
The default value is 2347.
6.
From the Preamble Mode menu for a radio, select the preamble mode:
•
Long Preamble: A long transmit preamble might provide a more reliable
connection or a slightly longer range.
•
Short Preamble: A short transmit preamble might give better performance.
CAUTION: Incorrect settings might disable the radio’s WiFi broadcast unexpectedly.
7. Click the Apply button.
Your settings are saved.
Use the WPS Wizard for WiFi connections
WPS (Wi-Fi Protected Setup) lets you connect a WPS-enabled device to your WiFi
network without typing the WiFi password. Instead, you push a software button in the
router web interface or enter a PIN to connect.
If you use the push button method, the device that you are trying to connect must
provide either a physical button or a software button. If you use the PIN method, you
must know the PIN of the device that you are trying to connect.
User Manual78Manage WiFi Settings
4-Stream AX1600 WiFi 6 Router Model RAX5
To Next Page
Loading...
Need help?
General
