EasyManuals Logo

NETGEAR RAX5 User Manual

NETGEAR RAX5
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Set up a guest WiFi network
A guest WiFi network allows visitors to use the Internet without using your WiFi security
password or with a different WiFi password. By default, the guest WiFi network is
disabled. You can enable and configure the guest WiFi network for each WiFi band.
The WiFi mode of the guest WiFi network depends on the WiFi mode of the main WiFi
network. For example, if you configure the WiFi mode for the main WiFi network as Up
to 54 Mbps in the 2.4 GHz band, the guest WiFi network also functions in the Up to
54 Mbps mode in the 2.4 GHz band. The channel also depends on the channel selection
of the main WiFi network.
The router provides two default guest WiFi networks with the following names (SSIDs):
2.4 GHz guest WiFi network SSID: NETGEAR-Guest
5 GHz guest WiFi network SSID: NETGEAR-5G-Guest
By default, these networks are configured as open networks without security but are
disabled. You can enable one or both guest networks. You can also change the SSIDs
for these networks.
To set up a guest WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Guest Network.
The Guest Network Settings page displays.
5.
Configure the following settings to set up a 2.4 GHz or 5 GHz guest WiFi network:
Enable Guest Network: By default, the guest WiFi network is disabled. To enable
the guest WiFi network for the 2.4 GHz or 5 GHz WiFi band, select the Enable
Guest Network check box.
Enable SSID Broadcast: By default, the router broadcasts the SSID of the WiFi
band so that WiFi stations can detect the WiFi name (SSID) in their scanned
network lists. To turn off the SSID broadcast for the 2.4 GHz or 5 GHz guest WiFi
network, clear the Enable SSID Broadcast check box.
User Manual71Manage WiFi Settings
4-Stream AX1600 WiFi 6 Router Model RAX5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RAX5 and is the answer not in the manual?

NETGEAR RAX5 Specifications

General IconGeneral
BrandNETGEAR
ModelRAX5
CategoryNetwork Router
LanguageEnglish

Related product manuals