NETGEAR RAX5 User Manual

Note: You cannot use the WPS Wizard to connect a device to a guest network.
Note: You cannot use WPS to connect devices if you are using WPA/WPA Enterprise
WiFi security.
Use the WPS Wizard with the push button
To use the push button method to connect a WiFi device to your WiFi network, the
device must have either a physical button or a software button.
To use the WPS Wizard with the push button:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5. Click the Next button.
The Add WPS Client page displays.
By default, the Push Button (recommended) radio button is selected.
6.
Click the green WPS software button on the page.
7.
Within two minutes, go to the WPS-enabled device and use its WPS software to
connect to the WiFi network.
The WPS process automatically sets up the WPS-enabled device with the network
password when it connects. The router web interface displays a confirmation message.
User Manual79Manage WiFi Settings
4-Stream AX1600 WiFi 6 Router Model RAX5

NETGEAR RAX5 Specifications

General

Brand	NETGEAR
Model	RAX5
Category	Network Router
Language	English