NETGEAR RAX5 User Manual

To cable your router:
1.
Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
Note: If your Internet connection does not require a modem, connect your main
Ethernet cable to the yellow Internet port on the router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
The router’s Power LED lights solid green when the router is ready.
User Manual14Hardware Setup
4-Stream AX1600 WiFi 6 Router Model RAX5

NETGEAR RAX5 Specifications

General

Brand	NETGEAR
Model	RAX5
Category	Network Router
Language	English