The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
The Block Services page displays.
5. Select when to block the services:
• Per Schedule: Turn on service blocking according to a schedule that you set. For
more information, see Schedule when to block Internet sites and services on page
55.
•
Always: Turn on service blocking all the time, independent of the Schedule page.
6. Click the Add button.
The Block Services Setup page displays.
7. To add a service that is in the Service Type menu, select the application or service.
The settings for this service automatically display in the fields.
8.
To add a service or application that is not in the menu, select User Defined, and do
the following:
a.
If you know that the application uses either TCP or UDP, select the appropriate
protocol. Otherwise, select TCP/UDP (both).
b. Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields. To find
out which port numbers the service or application uses, you can contact the
publisher of the application, ask user groups or newsgroups, or search on the
Internet.
9.
Select a filtering option:
•
Only This IP Address: Block services for a single computer.
•
IP Address Range: Block services for a range of computers with consecutive IP
addresses on your network.
•
All lP Addresses: Block services for all computers on your network.
10. Click the Add button.
Your settings are saved.
User Manual54Control Access to the Internet
4-Stream AX1600 WiFi 6 Router Model RAX5
To Next Page
Loading...
Need help?
General
